Cavity Wall Insulation has been surveying and installing in Newport for years — cavity-wall fill, loft top-ups, internal and external wall systems, and underfloor work. Most streets in Newport have a high proportion of cavity-wall semis built between 1930 and 1975, where standard bonded-bead fill is usually the right specification.
Most streets in Newport have a high proportion of cavity-wall semis built between 1930 and 1975, where standard bonded-bead fill is usually the right specification. Older terraces near the centre, however, are typically solid-wall and need either internal lining or a render-finished external system.
Exposed coastal and elevated areas around Newport get hammered by wind-driven rain, which is why we won't blow loose-fibre cavity fill on properties with severe exposure ratings — bonded bead is the right specification, every time.
Whatever your property type, we'll specify the right system. These are the services we install across Newport and the surrounding area.
Top-up or full re-lay to current depth standards, with hatch draught-proofing.
Bonded bead or blown fibre, drilled and pumped with a written 25-year guarantee.
Render-finish system for solid-wall homes — warmth and weatherproofing in one.
Slim breathable boards for listed and conservation properties.
Mineral wool or rigid board between joists; stops cold from below.
Safe foam removal from awkward voids, surveyed and extracted to current standards.
End-of-terrace properties in Newport lose disproportionate heat through the gable. We often quote external wall insulation on the gable only, leaving the rest of the property's brickwork on show — a small job with an outsized comfort gain.
Local trades know us in Newport — we work alongside roofers, plasterers and electricians regularly, and we're happy to coordinate around other work so insulation gets done in the right sequence.
Four steps, no surprises. We follow the same process on every property in Newport.
A local surveyor visits, inspects the loft, walls and any exposed floor voids, and asks about damp history, ventilation and any planned building work.
Itemised by measure — loft top-up, cavity fill, EWI per elevation — with materials, guarantee scope and labour broken out separately. No surprise extras.
Two or three-person team, dust sheets down, all access points (loft hatch, drilled holes) reinstated and made good before we leave site.
Walk-through with the lead installer. You get the guarantee paperwork the same day and a follow-up call after the first heating month.
A few representative jobs from our recent work in and around Newport.
1960s cavity-wall property with original mineral fibre fill that had slumped on the gable. We extracted the failed material, refilled with bonded bead, and topped the loft from 100 mm to 300 mm. Owner reported the upstairs bedrooms holding heat through the night for the first time in a decade.
Solid-wall mid-terrace with damp staining on the north wall. Specified breathable internal wood-fibre boards on two external walls and re-laid the loft. The damp resolved within six weeks as the wall fabric began to dry, with no chemical treatment needed.
External wall insulation applied to the exposed gable only, finished in a silicone render matched to the existing brick tones. The bedroom that shares the gable wall went from being the coldest room in the house to the warmest.
Insulation done badly is worse than no insulation. These are the issues we're called out to remediate most often in Newport.
Yes. We regularly survey listed buildings and properties in conservation areas around Newport. The specification almost always uses breathable internal wall systems rather than cavity or external fill, and we'll handle the consents conversation with your local planning office if needed.
Someone over 18 needs to be on site at the start of the day to grant access and at the end for sign-off. You don't need to be present during the install itself — most cavity work happens externally and most loft work is contained to the loft space.
Yes. Cavity extraction is a service we offer across Newport as a standalone job or as part of a refill. We use specialist whirling-chain equipment to remove slumped or damp material before refilling with bonded bead.
Minimal. Cavity wall is mostly external — neighbours rarely realise it's happening. Loft work creates a couple of hours of activity in the access room below the hatch. We use dust sheets, leave the property clean, and put the loft hatch back as we found it.
A standard 3-bed semi in Newport is normally drilled, filled and reinstated within a single working day. The team arrives between 8:00 and 8:30, the install itself usually takes four to six hours, and the drill holes are colour-matched to the existing mortar before we leave.
For a typical 3-bed semi in Newport, expect £600–£1,200 for cavity wall insulation, depending on wall area, gable exposure and whether existing material needs extracting first. We'll always give a written, itemised quote after the free survey — never a phone estimate.